HalfAutomatic Pneumatic Pipe Cutting And Beveling Tools For On-site
Construction
Product Introduction
The Split Frame machines is ideal for all types of pipe
cutting,beveling and end prepping.Our precise,consisteently square
cuts and bevels on pipe and tube and casing the first time,every
time.SFM series machines are widely used in nuclear power, thermal
power, petroleum, chemical plant, natural gas, boiler plant,
pharmaceutical factory and other areas.
Specifications
| Model | SFM0612P |
| Drive Mode | Pneumatic |
| Air Requirements | 2-3m³/min |
| Application Range (O.D.) | 6" - 12" (168.3-323.9mm) |
| Wall Thickness | ≤80mm |
| Net Weight | 45kg |
| Feed Method | Star wheel system |
| Feed | 0.08mm/r |
All standard accessories included
|
Bevel Type
We have standard beveling tools of 5°,10°,20°,30°,37° and also can
customize the tools.
We have several bevel type: v-shaped, y-shaped, compound shaped,
compound j-shaped as well as j-shaped. Customized tools can be
provided for processing bevels of other angles.
Standard Configuration
We have standard configuration for the shipped machine. In addition
to packaged SFM machine, we will give you relevant motor, cutting
and beveling tools according to your drive mode and choice. We will
have a set of tools to help use the machine such as rubber hammer,
spray bottle, square and wrench set. Moreover we will have relevant
documents to support you such as operating manual, certificate of
conformity and u-disk. If you have other demands, we will try to
meet your demands.
Storage
■ Clean the dust, debris and accumulated oil or grease on the
machine;
■ Inject some lubricating oil to the oil injection hole of the
machine, and run the motor for some time to lubricate internal
components;
■ Paint or apply a thin layer of anti-corrosion lubricating oil on
surfaces that have not be completed or painted;
■ Store the machine in a storage case, and put all components in
corresponding compartments;
■ The storage case shall be stored indoors as far as possible and
kept dry.
