Subsea Cutter Diamond Wire Guillotine Saw HS Controls 730lbs Weight
Product Introduction
Bohyar engineering material technology company is the first one in
China to achieve own research and development ability of producing
diamond wire saw. The subsea diamond wire saw is designed for
underwater cutting of horizontal or vertical pipes, casings and
structure, with five models that cut from 4in to 84in O.D. Running
on hydraulic power, the wire saw is controlled remotely with
dedicated HS controls, topside control panels or by ROV control.
Industry Application
The diamond wire saw cutting machine is widely applied in deep sea
operations, shallow sea operations and platform operations. It is
designed for underwater cutting of horizontal or vertical pipes,
casings and structure.
Features
■ Lightweight planetary feed drive
■ Large diameter high contact area wire drive wheels.
■ Hydraulic wire drive motor w/overhung bearing support.
■ Lift interfaces for vertical or horizontal deployment.
■ Lightweight aluminum plate construction.
■ User replaceable clamp contact pads and wheel inserts.
■ Optional TCP Topside Control Panel or by ROV control.
Technical Parameters
| Model | DWS 0416 | DWS 1230 | DWS 1636 | DWS3052 | DWS604 |
Maximum Pipe Capacity | 16in (406mm) | 30in (762mm) | 36in (914mm) | 52in (1321mm) | 84in (2134mm) |
Minimum Pipe Capacity | 4in (102mm) | 12in (305mm) | 16in (406mm) | 30in (762mm) | 60in(1524mm) |
| Height | 55in (1397mm) | 82.5in (2096mm) | 92.5in (2350mm) | 127in (3226mm) | 205in (5207mm) |
| Width | 44in (1118mm) | 63.75in (1619mm) | 69.75in(1772mm) | 87.25in(2216mm) | 118.8in (3017mm) |
| Depth | 28in (711mm) | 30in (762mm) | 32in (813mm) | 43in (1092mm) | 43in (1092mm) |
| Weight | 730lbs(331Kg) | 1000lbs (454Kg) | 1200lbs (544Kg) | 1600lbs (726Kg) | call |
Safety Instructions
Safety is our priority when diamond wire saw machines are designed,
and ergonomics is also taken into consideration to ensure product
safety and reliability.
a)
■ Operators should read the safety instructions carefully before
operation and properly keep them for reference at any time.
■ Operators should be well aware of the products and fully familiar
with the key points of product operations.
■ Before operation, ensure the operators are kept away from any
live part such as motors and cables.
■ Operators should be kept away from the rotating cutter head as
far as possible for safety when the machine is working.
Information and Feedback
Maintenance Information: Before the machine or any of its
accessories is returned for maintenance, please call Bohyar
Company. We will give suggestions on transportation and handover of
the machine or accessories, and estimate the time and cost of
corresponding maintenance.
Feedback: To constantly improve the satisfaction of users with the
product quality and service, we will appreciate if you contact us
to present any better operation or service methods of the equipment
or any suggestion on the optimization of any technical data. We
will consider and undertake to validate your precious suggestions,
so as to modify or update the product and operation manual for
improvement.
