Inner Mounted Cold Pipe Cutting And Bevelling Machine Pipe Beveler
Quick Installation
Product Introduction
BPP series of internal-expanding pipe beveling machine is the pipe
processing equipment independently developed by our company based
on the market and prospect of the pipe service industry. The
products are portable, precise, efficientand in modular design,
fully meeting customer demands. It's designed for simultaneous
facing and beveling tubes and pipes (including carbon steel, alloy
steel and stainless steel) from 12.5mm to 240mm I.D. up to a wall
thickness of 0.75" (18mm).
Application
Our ID mounted pipe beveling machines are applied in pipeline
installation engineering, rush-repair work, heat exchangers, power
plant, nuclear power, petroleum, chemical engineering, natural gas,
pharmacy, pressure vessels etc.
Features
■ Compact structure and good appearance, high strength aluminum body
■ Lightweight and high-strength aluminum - ensure portability.
■ Interchangeability of components - allows accessories & tool
slides to mount to multiple ring sizes
■ Cold machining - no heat affected zones.
■ Precision-manufactured tool slides - ensure absolute rigidity.
■ Quick installation, positioning the machine in the center of the
tube and install the appropriate tool to complete the preparation.
■ Well-adapted, you can make the speed adjust depend on the working
conditions.
Technical Parameters
Model | Processing range (IDmm) | Wall thickness (mm) | Rated power (kw) | Rotating speed (rpm) |
BPP1E kit1 | 12.5-15 | ≤3 | 1.43 | 3-70 |
BPP1E kit2 | 15-20 | ≤5 | 1.43 | 3-70 |
BPP1E kit3 | 20-28 | ≤6 | 1.43 | 3-70 |
BPP3E/ BPP3P | 26-79 | ≤15 | 1.43 | 3-70 |
BPP3PE | 36-90 | ≤15 | 1.43 | 3-50 |
BPP4E/ BPP4P | 45-105 | ≤20 | 1.43 | 34 |
BPP6E/ BPP6P | 65-159 | ≤20 | 1.43 | 34 |
BPP9E | 80-240 | ≤15 | 1.43 | 16 |
*Electric: Rated voltage of 220V, 50/60Hz
Installation & Processing
■ Measure the inside diameters of the pipe to be processed and
choose a suitable machine and expansion block.
■ Select the appropriate block, place it on the bottom of the
expansion block to ensure the top surface of the expansion block
remain horizontal without any inclination, and rotate the sleeve
anticlockwise to tighten the expansion block and, ensure that the
machine is firmly fixed in the pipeline.
■ Choose a tool with suitable angle listed in the tool table based
on the processing requirements, install it on the cutter head of
the machine and tighten the bolts to fix the tools.
■ Rotate the feed hand wheel and extend the feed spindle Loosen
screw and feed.
■ Stretch the machine expansion mechanism into the pipe, and
reserve sufficient feed space between the tool on the cutter head
and the pipe end face.
■ Rotate the expansion sleeve with the ratchet wrench while
adjusting the position of the machine to ensure the feed spindle
and the center of the pipe is concentric; Tighten nuts on the
expansion sleeve with the ratchet wrench after determining the
position.
■ Start the motor. Rotate the feed handwheel to make the cutting
edge contact with the pipe wall, and then bevel.
Information and Feedback
Warranty Information: The BPP pipe beveling machine produced by
Bohyar has a warranty period of one year. In case of any quality
problem during the warranty period, we will provide free
maintenance and repairment service.
Feedback: We will highly appreciate if you contact us to present
any better operation or service methods of the equipment or any
suggestion on the optimization of any technical data. We will
consider and undertake to validate your precious suggestions, so as
to modify or update the product and operation manual for
improvement.
