Lightweight Hydraulic Pipe Cutting And Beveling Machine No Heat
Affected Zones
Product Introduction
SFM series are portable processing equipment for cutting, beveling
and end prefabrication of various pipes, with which cutting and
beveling can be conducted at the same time. The SFM Series
manufactured by Bohyar cuts and bevels the pipe end or middle of
pipe by clamping external wall, with processing diameter up to 2100
mm and maximum wall thickness of 100 mm. With an R&D history of
nearly one hundred years, the product can process pipes or casings
accurately, continuously and vertically.
Industry Application
The SFM Series of Pipe Cutting and Beveling Machines are widely
used in long-distance transport pipeline, power plant, nuclear
power, petroleum, chemical engineering, natural gas, boiler shop,
pharmacy, pipe prefabrication plant, pipeline installation
engineering, rush-repair work, etc. Our products play an important
role in these fields.
Models
We have sixteen standard split frame machines from 2'' to 84'' with
three drive modes: pneumatic drive mode, hydraulic drive mode and
electric drive mode. The processing range of our pneumatic machines
is from 2''-18''. In addition, the processing range can be
customized according to the pipe diameter. We have strong product
customization capabilities to meet different customer needs.
Specifications
We have three drive modes and they also have different technical
parameters. The air requirements are 2-3m³/min. The hydraulic
requirements are 65L/min, 10mpa. The electric requirements are
220V/AC. We adopt the star wheel system with 0.08mm/r feed amount.
The finish is anodizing sand blasting. We have different packaging
methods such as aluminum alloy, metal packing case or wooden box
according to the different models of split frame machines.
Disassembly
■ Remove the driving device (pneumatic, electric or hydraulic) from
the split frame machine;
■ Withdraw the tool slide; disassembly tool slide is not
necessarily needed for storage of the machine;
■ Remove foreign matters from the machine such as metal debris and
excess cooling agent;
■ Separate the machine into two parts, and check whether there is
any metal debris on the bearing guiderail;
■ Drip few drops of rail lubricant on a felt wiper before storing
the machine.
