T Inner Mounted Electric Pipe Beveling Machine,Tube Beveller With
Adjustable Speed
Product Introduction
Bohyar’s electric pipe beveling machine is a lightweight, portable
end prep beveler to produce precise, highly repeatable weld preps,
which is widely used in boiler, pharmaceutical industry and other
areas. It can process various material pipes such as stainless
steel carbon steel, alloy steel under different inner mounted size
from 12.5mm to 240mm.Our BPP pipe beveler is the ideal choice for
various pipe end cutting and beveling.
Structure
Technical Parameters
| Brand | Bohyar |
| Model | BPP3E |
| Drive Mode | Electric |
| Electric requirement | 220-230V 1PH 50/60HZ |
| Power | 1.43KW |
| Application Range (I.D.) | 26mm-79mm |
| Wall Thickness | ≤15mm |
| Rotating speed | 3-70rpm |
| All standard accessories included |
*Electric: Rated voltage of 220V, 50/60Hz
Features
■ Made of lightweight and high-strength aeronautical aluminum
material to ensure portability.
■ The machines are small and light since their main body is made of
aviation aluminum and the sizes of all parts are optimized. The
well designed expansion mechanism can realize quick and precise
positioning, moreover, the machines are solid enough, with
sufficient rigidity for the processing. A variety of available
cutters enable the machines to process pipes of different materials
and bevel ends with various angles and plain ends. Besides, the
unique structure and its self-lubrication function endow the
machines with long service life.
■ Position the machine in the center of the tube and install the
appropriate tool to complete the preparation.
Installation & Processing
■ During installation, the tools should not touch the feed spindle
and the expansion block.
■ The expansion block should not be stretched too deep into the
pipe and keep about 20 mm from the pipe end face.
■ During processing, control the feed speed based on cutting
conditions to avoid damage of blades and parts in the machine; In
case of vibration of the machine or uneven bevel face, timely
tighten the expansion hand wheel to prevent the looseness of the
expansion, which may cause damages to the machine.
During installation, the tools should not touch the feed spindle
and the expansion block.
■ The expansion block should not be stretched too deep into the
pipe and keep about 20 mm from the pipe end face.
■ During processing, control the feed speed based on cutting
conditions to avoid damage of blades and parts in the machine; In
case of vibration of the machine or uneven bevel face, timely
tighten the expansion hand wheel to prevent the looseness of the
expansion, which may cause damages to the machine.
